Walthers 933-2850 HO Scale Motorized 130' Turntable with DCC EX/Box
This is Walthers 933-2850 130' Turntable DCC. Motorized 130' turntable with DCC, built-ups, assembled. Walthers Cornerstone. As engines grew larger and heavier from the 1920s on, many roads modernized their terminals and shops with equally big turntables. Still in use at some locations today, this detailed model makes it easy to upgrade your operations too!
Designed for easy installation on new or existing layouts, the model features a sturdy one-piece plastic pit that's preweathered, and a detailed plastic bridge with separate arch.
A built-in decoder with programmable address allows for easy programming and operation directly from most DCC throttles. The model is right at home on DC-powered layouts too, and can be operated using the Control Box that's included.
Programmable indexing for as many as 28 service tracks (plus one factory-programmed location that can also be used as a service track)lets you install tracks almost anywhere you need them. And complete installation and programming instructions make set-up fast and easy.
If your road runs big power, this is the turntable for you, with a bridge that can handle any loco up to a 4-8-8-4 Big Boy.
Its key features are:
Programmable DCC address
Built-in decoder
Operate directly from most DCC throttles
Great for DC layouts - controller included
Fully assembled
Programmable indexing for up to 60 positions
Motorized gear drive
Authentic American design
Weathered one-piece plastic pit
Detailed bridge with arch
Measures:
Overall diameter: 19-1/8 (47.8cm)
Inside diameter (benchwork opening required): 18-1/4 (45.6cm)
Bridge length: 18-7/8 (46.1cm)
This item has been graded per TCA standards C-7: Excellent based on visual appearance. This item shows light scratches and scrapes on the body, detail pieces, and bases. The track section shows light scratches on the rails. The section show light scratches and nicks on the roadbed. The cords are scratched. This item has been out on display previously and its overall appearance could be significantly improved with a thorough dusting or a light wipe down. The instruction manual is included. The original box is included. Please check the photos for a detailed look at this item. Overall condition is Excellent.
Condition: Excellent (C-7)
Operational Status: Functional
Original Box: Yes (P-6)
Manufacturer: Walthers
Model Number: 933-2850
Road Name: **** No Road Name
Scale/Era: HO Scale
Model Type: Track
The Trainz SKU for this item is 6183125.
Trainz Product Id: 11962782
Designed for easy installation on new or existing layouts, the model features a sturdy one-piece plastic pit that's preweathered, and a detailed plastic bridge with separate arch.
A built-in decoder with programmable address allows for easy programming and operation directly from most DCC throttles. The model is right at home on DC-powered layouts too, and can be operated using the Control Box that's included.
Programmable indexing for as many as 28 service tracks (plus one factory-programmed location that can also be used as a service track)lets you install tracks almost anywhere you need them. And complete installation and programming instructions make set-up fast and easy.
If your road runs big power, this is the turntable for you, with a bridge that can handle any loco up to a 4-8-8-4 Big Boy.
Its key features are:
Programmable DCC address
Built-in decoder
Operate directly from most DCC throttles
Great for DC layouts - controller included
Fully assembled
Programmable indexing for up to 60 positions
Motorized gear drive
Authentic American design
Weathered one-piece plastic pit
Detailed bridge with arch
Measures:
Overall diameter: 19-1/8 (47.8cm)
Inside diameter (benchwork opening required): 18-1/4 (45.6cm)
Bridge length: 18-7/8 (46.1cm)
This item has been graded per TCA standards C-7: Excellent based on visual appearance. This item shows light scratches and scrapes on the body, detail pieces, and bases. The track section shows light scratches on the rails. The section show light scratches and nicks on the roadbed. The cords are scratched. This item has been out on display previously and its overall appearance could be significantly improved with a thorough dusting or a light wipe down. The instruction manual is included. The original box is included. Please check the photos for a detailed look at this item. Overall condition is Excellent.
Condition: Excellent (C-7)
Operational Status: Functional
Original Box: Yes (P-6)
Manufacturer: Walthers
Model Number: 933-2850
Road Name: **** No Road Name
Scale/Era: HO Scale
Model Type: Track
The Trainz SKU for this item is 6183125.
Trainz Product Id: 11962782
$84.94
Original: $283.13
-70%Walthers 933-2850 HO Scale Motorized 130' Turntable with DCC EX/Box—
$283.13
$84.94Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
This is Walthers 933-2850 130' Turntable DCC. Motorized 130' turntable with DCC, built-ups, assembled. Walthers Cornerstone. As engines grew larger and heavier from the 1920s on, many roads modernized their terminals and shops with equally big turntables. Still in use at some locations today, this detailed model makes it easy to upgrade your operations too!
Designed for easy installation on new or existing layouts, the model features a sturdy one-piece plastic pit that's preweathered, and a detailed plastic bridge with separate arch.
A built-in decoder with programmable address allows for easy programming and operation directly from most DCC throttles. The model is right at home on DC-powered layouts too, and can be operated using the Control Box that's included.
Programmable indexing for as many as 28 service tracks (plus one factory-programmed location that can also be used as a service track)lets you install tracks almost anywhere you need them. And complete installation and programming instructions make set-up fast and easy.
If your road runs big power, this is the turntable for you, with a bridge that can handle any loco up to a 4-8-8-4 Big Boy.
Its key features are:
Programmable DCC address
Built-in decoder
Operate directly from most DCC throttles
Great for DC layouts - controller included
Fully assembled
Programmable indexing for up to 60 positions
Motorized gear drive
Authentic American design
Weathered one-piece plastic pit
Detailed bridge with arch
Measures:
Overall diameter: 19-1/8 (47.8cm)
Inside diameter (benchwork opening required): 18-1/4 (45.6cm)
Bridge length: 18-7/8 (46.1cm)
This item has been graded per TCA standards C-7: Excellent based on visual appearance. This item shows light scratches and scrapes on the body, detail pieces, and bases. The track section shows light scratches on the rails. The section show light scratches and nicks on the roadbed. The cords are scratched. This item has been out on display previously and its overall appearance could be significantly improved with a thorough dusting or a light wipe down. The instruction manual is included. The original box is included. Please check the photos for a detailed look at this item. Overall condition is Excellent.
Condition: Excellent (C-7)
Operational Status: Functional
Original Box: Yes (P-6)
Manufacturer: Walthers
Model Number: 933-2850
Road Name: **** No Road Name
Scale/Era: HO Scale
Model Type: Track
The Trainz SKU for this item is 6183125.
Trainz Product Id: 11962782
Designed for easy installation on new or existing layouts, the model features a sturdy one-piece plastic pit that's preweathered, and a detailed plastic bridge with separate arch.
A built-in decoder with programmable address allows for easy programming and operation directly from most DCC throttles. The model is right at home on DC-powered layouts too, and can be operated using the Control Box that's included.
Programmable indexing for as many as 28 service tracks (plus one factory-programmed location that can also be used as a service track)lets you install tracks almost anywhere you need them. And complete installation and programming instructions make set-up fast and easy.
If your road runs big power, this is the turntable for you, with a bridge that can handle any loco up to a 4-8-8-4 Big Boy.
Its key features are:
Programmable DCC address
Built-in decoder
Operate directly from most DCC throttles
Great for DC layouts - controller included
Fully assembled
Programmable indexing for up to 60 positions
Motorized gear drive
Authentic American design
Weathered one-piece plastic pit
Detailed bridge with arch
Measures:
Overall diameter: 19-1/8 (47.8cm)
Inside diameter (benchwork opening required): 18-1/4 (45.6cm)
Bridge length: 18-7/8 (46.1cm)
This item has been graded per TCA standards C-7: Excellent based on visual appearance. This item shows light scratches and scrapes on the body, detail pieces, and bases. The track section shows light scratches on the rails. The section show light scratches and nicks on the roadbed. The cords are scratched. This item has been out on display previously and its overall appearance could be significantly improved with a thorough dusting or a light wipe down. The instruction manual is included. The original box is included. Please check the photos for a detailed look at this item. Overall condition is Excellent.
Condition: Excellent (C-7)
Operational Status: Functional
Original Box: Yes (P-6)
Manufacturer: Walthers
Model Number: 933-2850
Road Name: **** No Road Name
Scale/Era: HO Scale
Model Type: Track
The Trainz SKU for this item is 6183125.
Trainz Product Id: 11962782
